Skip to content

YD2PLUS DRIFT PACKAGE YD-2 PLUS CHASSIS KIT
BM2953

$410.00
Available to order

Description

Yokomo made 1/10 YD-2 Plus RWD Competition Drift Car Kit Graphite (YOKDPYD2PLS) RWD drivetrain On-Road Drift Cars assembly kit

RWD drift dedicated chassis YD-2 drift RC of Pioneer Yokomo send out. The drive system of the novel 4 gear drive, realize the good and the rear traction height of throttle response. Less collapse of left-right balance in a horizontal motor, neutral steering characteristics will produce a margin in line trace.

Around the front of course RWD drift machine dedicated to completely new design. In the setting of Ackermann ratio driver stuck team Yokomo, won the steering characteristics of the honest feeling. The degree of difficulty of a full counter drift has dropped much.

4 gear transmission of innovative design as a drift car. Prevent the collapse of the left and right balance due to the reaction torque of the motor by the motor and horizontally, pull the neutral steering characteristics. On the other hand because the rear traction is increased in the throttle ON, it is possible to derive a sense of stability and the acceleration force at the time of the corner escape. Also attractive for high dust resistance in the sealed gear box.

In accordance with the counter running of RWD drift, front steering angle and Ackerman ratio of stuck to thoroughly. Front of the run by pulling out the at the time of steering, to prevent the entrainment of the rear, allows little stall sense of cornering. Of course can change the mounting position of the tie rod to match the feeling and the road conditions of the driver, it corresponds to the variety of circumstances that, including road surface grip.

Carbon double deck chassis strike a racy atmosphere. Pull out the appropriate roll during cornering by slightly wide form, it enhances the sense of stability when cornering. Behavior is improved controllability in to become a gentle, it is possible to direct the behavior of the machine is also more realistic.

By changing the battery holder, also supports short Li-po battery straight from the pack of full-size.

Subjected to Kashima coat treatment to aluminum shock cylinder, super low friction shock that reduces the frictional resistance between the piston up to the limit. Adopt a 11.2mm big bore cylinder of class maximum capacity for on-road. In the running of the resin tire to be used in the drift, although a small vibration to receive from the road surface is a major factor in reducing the tire grip, also absorb up vibration in the super low friction shock with increased shock capacity, maximum grip you won. Since it is a vehicle height adjustment type, can change the vehicle height by simply rotating the spring tensioner, also supports the spring of various lengths. Of course, by finely adjusting the damping force in the shock oil and pistons of the changes, the optimum setting is obtained in accordance with the variety of road surface and driving situation.

Key Features Specifications

Total length: 425Mm

Overall width: 198Mm

Wheelbase: 256Mm

Secondary reduction ratio: 1: 2.6

All equipped weight: 1500G

4 gear rear transmission

New design sealed gear box

Four-wheel independent double-Wish bone suspension

SLF aluminum big bore oil shocks

2.5mm thickness high-rigidity carbon graphite main chassis

2.5mm thick carbon graphite upper deck

Aluminum suspension mounts

Aluminum motor mount plate

RWD-only high-angle steering system

49mm bone rear Universal shaft

New design narrow scrub knuckle

Large rear diffuser

Required:

2 Channel radio set (transmitter, receiver, speed controller, servo)

Battery (Li-po 2 cell),

Charger,

Tire,

Wheel,

Motor,

Body,

Polycarbonate paints

Delivery

We only ship within Australia. Getting your goods to you safely and swiftly is of utmost importance to us. That is why we use a number of different carriers to ensure we can get your order to you regardless of your address or the size of your order. To ensure secure delivery of orders to the correct recipients our carriers all require someone to sign for the consignments at the final destination.

Delivery Costs and Times

Delivery charges and the time the order takes to reach you obviously depends on your location, how much you have purchased, and, what freight method you have selected. As a general rule we aim for a 24-hour turnaround from the moment your order has been received to the order being shipped from our Store.

Australian Orders

Aussie Hobbies reserves the right to upgrade the freight method to a courier service at no extra cost to the recipient if the selected method of freight is inappropriate. Aussie Hobbies reserves the right to cancel an order if it deems the freight method is not appropriate to ensure the parcel arrives in an acceptable condition. Please note that items greater than 5 cubic kg's CANNOT be shipped to PO Boxes. We must have a street address for any order totalling over the 5 cubic kg mark, or, any order greater than 1050mm in length. As our carriers require a signature at the point of delivery it is a requirement that you provide Aussie Hobbies with a delivery address where someone will be present to sign for the consignment during business hours (9am - 5pm Monday to Friday). Work addresses are often given by customers to make this process easier.

Available Freight Options

Australia Post: This is an ordinary post service generally used for smaller items. This service is NOT insured, comes with tracking number/details, and, is used at the customer's own risk.

Couriers: We use a combination of carriers to ensure flexibility with delivery options. These services are insured and have online track and trace systems. On the customer's request we can instruct our carriers with an 'Authority to Leave' which does not require a signature to be taken. If this option is chosen the insurance is invalidated, and, if any consignments are 'lost' after our carriers have recorded the parcels as 'successfully delivered' they are not covered by Aussie Hobbies. ensuing search results should show you the current status of your order, and, it's physical location.

If your order is severely overdue, please contact our Customer Service Team on (07)3255 6626 between 9.30am and 5pm (Monday to Friday). You can also get in touch with our Customer Service Team via the contact form at our contact page. You will need to quote your order number in any communications with Aussie Hobbies.

If a package has been damaged in shipping and it is apparent when the package arrives at your door, please REFUSE the delivery. If you have already accepted a package and then discover that it has been damaged, call us immediately. If possible, please take photos of the damaged packages. If we are to put a claim into our freight company a photo provides fairly conclusive proof of where the fault lies. Be sure to save all paperwork and packing material with the damaged goods as the carrier may wish to inspect the consignment before processing the claim. Please do not return 'damaged in transit' merchandise yourself. Please contact us and we will make arrangements for the collection of the damaged goods, and, organise replacement product to be shipped to you. Returning the goods, yourself could also jeopardize your claim and keep you from receiving credit for the return.

Defective Merchandise

If you receive defective merchandise, please call Aussie Hobbies for return instructions. In most cases we will accept returns and make adjustments, however, some manufacturers prefer handling defects directly. Defects found after the product is in use usually fall under manufacturer warranty. A customer service representative will be happy to help you determine which procedure is appropriate for you.

Lost Boxes

If you feel a box has been lost in transit, please call Aussie Hobbies with the order or invoice number and a list of the missing items. A track and trace search will be undertaken and enquiries will be made with the relevant freight company to try and locate the missing box. A claim number will be issued if the carrier does not show delivery within 10 days of the scheduled delivery date. Credit will be issued for the missing merchandise when we obtain the claim number from the carrier.

Missing Parts

Should you receive merchandise that is missing a part please contact us. We will ensure that you are sent the part from our stock as appropriate. In accordance with a request from some of our manufacturers, we may direct the information or your call directly to the manufacturer.

Missing or Damaged Shipments

Please ensure that all boxes in your order are present, and, in a reasonable condition prior to signing for delivery. On occasion carriers may deliver orders over two different deliveries dependent on the size of the order. Please note that ground and air shipments can be assigned to separate trucks and may arrive at different times of the day. Please do not sign for boxes with exterior damage. This will immediately invalidate any insurance for 'Damaged Goods' and immediately becomes the customer's property in its signed condition. If the box has been delivered without the driver obtaining your signature, contact the carrier before opening the package. The carrier will need to inspect the box and verify any damage before a refund or replacement can occur.

For any more information, please contact us.

Returns

Aussie Hobbies puts a high value on customer satisfaction, and we want you to be 100% happy with your purchase! Returns are accepted provided the item is unopened & unused. The original packing must be in good undamaged condition. Once a component has been fitted it's considered to have been used i.e. if you fit a servo to a model but don't power it up it is still used. If the item meets the above criteria a full refund for the item value will be offered, less postage. Any returns must be arranged with us prior to you sending items back. Complete with all manuals & accessories. Accompanied by a purchase invoice. Accompanied by purchasers contact details. Returned items are to be addressed to Aussie Hobbies 2/839 Beaudesert Rd Archerfield Qld 4108.

All items are covered by a minimum 30 day warranty unless otherwise specified. We may require you to return any defective item/s to us at your cost & will repair/replace at our discretion.

Refunds by law: In Australia, consumers have a legal right to obtain a refund from a business for goods purchased if the goods are faulty, not fit for purpose or don't match description.

For any more information, please contact us.

Reviews

This product has not yet been reviewed

Also bought items

ARRMA TALION 6S 2019 SPEC RED ARRMA TALION 6S 2019 SPEC RED
$889.00
In stock
Overview Engineered to bash, designed to thrill - the 1/8 scale ARRMA® TALION™ 6S BLX 4WD speed truggy reaches 70+ mph right out of the box. Now comes complete with the 2.4GHz Spektrum™ STX2® radio system, it's tough as nails and ready for fast action on any terrain! Features Ready-to-run Extremely durable Fast, 70+ mph speed potential * 150A, 6S LiPo ready (3S, 4S and 6S LiPo compatible) Anodized…
BLASTER 1/18 MONSTER TRUCK 4WD BRUSHED BLASTER 1/18 MONSTER TRUCK 4WD BRUSHED
$99.00
In stock
HBX 18859 BLASTER XL 1/18TH RTR 4WD OFFROAD ELECTRIC TRUCK Featuring lightweight configuration and design, the Blaster XL is ready to run and ready to hit the track! 2.4GHz Radio System Four Wheel Drive Exquisite Configuration Design Smart and Lightweight Speedy, Durable and Enjoyable Ready to Run Battery Powered Specifications: Length: 230mm Width: 178mm Height: 153mm Wheelbase: 160mm Wheel Diame…
ECX00017T2 ECX BARRAGE SCALE CRAWLER 1/24 SCALE BLUE ECX00017T2 ECX BARRAGE SCALE CRAWLER 1/24 SCALE BLUE
$169.00
In stock
Overview From the brand known for its rugged durability, the 1/24-scale 4WD ECX® Barrage® Scaler goes where other scale crawlers of the same size can never reach featuring a beginner-friendly price without sacrificing performance or scale looks. Features Licensed Falken™ WildPeak M/T Tires Rear Truggy Roll Cage with Functional Spare Tire True 4-Link Suspension 4.8V 220mAh NiMH Battery Pack NiMH On…
LARGE SILVER BODY PIS FOR 15TH SCALE CARS & BUGGIES(10) LARGE SILVER BODY PIS FOR 15TH SCALE CARS & BUGGIES(10)
$10.00
In stock
LARGE SILVER BODY PIS FOR 15TH SCALE CARS & BUGGIES(10)
MUD, DIRT & GRIME PREVENTER MUD, DIRT & GRIME PREVENTER
$17.95
In stock
Mud Buddy concentrate,it is an Australian made water soluble protective coating to stop mud sticking to your vehicle be it 4WD off road cars, speedway cars, or our RC cars & trucks, and makes clean up quick and easy, mud and grime just wash off with ease comes in in 1 ltr bottles $17.95

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.